bio-active

You are here: Home Products TOMY Uncategorised Autoclaves FLS-1000

ttl ph01

 

FEATURES

  • Large Capacity
  •  
  • Perfect Height Design
  •  
  • Secure Sterilization
  •  
  • Power Failure Alert & Restart
  •  
  • For High Altitude Users
  •  
  • Save You Lots

Large Capacity

Equips 450mm wide dimension chamber with 100L capacity.

Outstanding Loading Capacity

Bottle
Flask

5000mL×4 pcs(Click here for details)

Animal Cage

Perfect Height Design

<Image>

ADVANTAGE

  • 1Easy loading / unloading of the articles
  • 2Easily-accessible chamber allows easy cleaning
<Comparison Drawing>

Secure Sterilization

Fine Pressure Adjustment

It is easy to break the balance of temperature and pressure during the sterilization due to various factors such as air contained in the articles to be sterilized and sterilizing water.
Fine pressure adjustment function will work automatically to adjust the best balance of temperature and pressure (a kPa) for more effective sterilization.

Fine pressure adjustment function automatically sets the pressure upper limit (b kPa) and lower limit (c kPa). FLS-1000 controls the pressure balance within a certain range (between b kPa and c kPa) and brings it close to the ideal saturated steam.

For Secure Sterilization

Set the time considering “STERILIZATION TIME LAG“

There is STERILIZATION TIME LAG when using the steam autoclave.
The display shows the ambient temperature inside the chamber, 
but temperature of the articles to be sterilized arrives later than the display temperature. 
This is called “STERILIZATION TIME LAG“.
STERILIZATION TIME LAG also changes depending on the amount of the articles to be sterilized and also changes loading position in the chamber.
It takes more time to raise the temperature especially when loading large amount of articles to be sterilized.

STERILIZATION TIME LAG TEST DATA
(Click here for details)

Power Failure Alert & Restart

FLS-1000 shows the POWER FAILURE alert and stores the operation process for restart when a power failure occurs or the power switch is off during operation.
When the power failure occurs before the sterilization process has completed, the operation can be restarted after power is restored.
When the power failure occurs after the sterilization process has completed, the temperature and pressure go down after power is restored.
The operator can save the time for re-sterilization work.

For High Altitude Users

The FLS-1000 operates by generating steam under pressure and temperature. Therefore, its sterilization process can be greatly affected by the atmospheric pressure at the location where the FLS-1000 is installed.
FLS-1000 allows users to set altitude level, can operate secured sterilization even though at high altitude place.

*Available up to 2,000m.

Save You Lots

Intuitive Display

  • The LED display shows working status visually.
  • Swivable control panel for install location.
  • Sterilization can be selected from 3 courses.
    (Sterilization, Liquid Sterilization, Memory)

※The illuminated display on the operating panel shown in the picture 
is different from the actual display at the time of operation.

Fast Cooling Down (Standard-equipped Cooling Fan)

Standard-equipped cooling fan to shorten cooling time.
Cooling fan saves UP to 60 min (*) compared to non-fan operation.

*Test condition: No load operation, room temperature 25°C, Sterilizing water 6ℓ. Power input AC200V 18A.

Variable Exhaust Speed

The FLS-1000 allows the exhaust valve to open automatically to shorten cooling time after completion of sterilization is provided. The exhaust speed can be set to one of six levels. (For liquid sterilization course, set manually after completion of sterilization)

Timer Function

Preset timer allows to set starting time up to 99 hours.

Sterilizing Water Change Alert Function

In order to protect chamber corrosion from contaminated water inside, the change water indicator turns on when the sterilizing water should be replaced.

Annual Inspection Reminder Function

The annual inspection reminder function will notify the operator of the timing for the annual inspection when it approaches.

Selective Lid Opening (Left or Right)

Operator can choose opening direction

Safety Lid Opening Design (Avoiding Steam)

FLS-1000 is designed to avoid steam from the chamber. So, operator opens the lid without steam contact.

Mechanically-assisted Lid & Foot Pedal

By stepping on the foot pedal, you can open the lid and close it by just pressing down.

Easy Water Level Check with Water Level Indicator

Water level indicator of the chamber bottom plate allows operator to check the appropriate water level in the chamber visually and prevent the articles from soaking in sterilizing water.

Steam Trap Water Alert

The exhaust tank turns on red when water should be drained.

Wide Drain Piping

The wide drain piping reduces clogging, and smoothly drains water from chamber.

SAFETY DEVICES

Lid Interlock

A safety device locks the lid during operation.
A high level of safety is assured to prevent unexpected incident.

No Water Heating Prevention

A safety device for preventing no water heating is equipped.

Other Safety Devices

  • Safety valve
  • Leakage breaker
  • Over-temperature prevention
  • Over-pressure prevention
  • Temperature sensor malfunction detection
  • Pressure sensor malfunction detection
  • Exhaust valve malfunction detection
  • Low sterilizing water level detection
  • Chamber lid open / close detection
  • Drain acess cover open detection

OPTION

Temperature Sensor for Articles to be Sterilized

The sensor directly detects the temperature of articles to be sterilized.
More reliable sterilization monitor can be carried out.

One-touch coupler for installation of the temperature sensor for articles to be sterilized and the external temperature sensor. 
The sensors can be removed from or installed in the FLS-1000 by the use of the coupler.

  • <Installed>

  •  
  • <Not in use>

  •  
  • <Covered>

Printer

An optional printer (dot matrix) can print data including operating parameters, chamber temperature, chamber pressure, temperature for articles to be sterilized, and sterilization cycle process.
The printer can print out data from the start till the end of operation.

Data Output Function

The temperature data and pressure data can be exported to the external recorder.

Brackets for Anti-tip Straps

Brackets secure the autoclave using commercially available straps or wires to prevent it from toppling over.
Two brackets each can be mounted on the two sides of the autoclave.

ACCESSORIES

Basket, Bucket, Long Basket

  • “Double handle” is provided which keeps stability of large caliber basket and bucket.
  • Bottom up designed basket prevents from soaking in sterilizing water.
  • Stackable protrusion shape 
    ※The bucket will be used in one step.
  • ACA-1000B

  •  
  • ACA-1000K

  •  
  • ACA-1000TP

Accessories here

SPECIFICATIONS

FLS-1000 220V model 230V model 240V model
Equipment category : (medical/laboratory) Laboratory equipment
Operating temperature range Sterilization 105°C to 123°C*1
Maximum operating pressure 0.193MPa
Temperature Display form Digital
Display range -15°C to 175°C
Pressure gauge Display form Analog
Display range 0MPa to 0.4MPa (red zone : 0.193MPa)
Heat source (electric heater) 3.0kW 3.0kW 3.3kW
Safety devices ●Safety valve ●Lid interlock ●Leakage breaker ●No water heating prevention ●Over-temperature prevention ●Over-pressure prevention ●Temperature sensor malfunction detection ●Pressure sensor malfunction detection ●Exhaust valve malfunction detection ●Low sterilizing water level detection ●Chamber lid open/close detection ●Drain access cover open detection ●Exhaust tank full level detection
Time Display form Digital
Setting range Sterilization 0:01~9:59 / 1~99 hours / 1~999minutes /
0:01~9:59, 10~99 hours (selectable)
Chamber dimensions Inside diameter × inside dimension : φ450 x 678mm
Chamber capacity 100L (0.100m³)
Chamber material SUS304 (stainless steel)
Main body dimensions (mm) 600W x 600D x 940Hmm, top plate height : 785mm
680W x 680D x 1,022Hmm (including the pedal and control panel)
Compliance of standard IEC61010-2-040, IEC61326-1
Net weight 108kg
Rated current 14A 13A 14A
Power requirements Single-phase AC220V
50/60Hz 15A
Single-phase AC230V
50/60Hz 15A
Single-phase AC240V
50/60Hz 15A
Power consumption (heat output) 3.0kW
(2,580kcal/h)
3.0kW
(2,580kcal/h)
3.3kW
(2,838kcal/h)
Accessories Stainless steel basket (φ415 x 233mm) 2 pieces

*1 Max. operating temperature depends on the altitude level.
* Specifications and design are subject to change for improvement without prior notice.
* Please ask for the latest specifications prior to your order and procurement.

 

See Catalog PDF for details.

* This document is created in the PDF file format.
* To view PDF files, Adobe Reader or other software is needed.
* If you don’t have Adobe Readerclick here to download its latest version.
PDF downroad FLS-1000 (953KB)

Our Partners

Address

Bio-Active Co., Ltd. 
188/1 Bio-Active Bldg., Soi Sirung,
Chua Phloeng Rd., Chongnonsi,
Yannawa Bangkok 10120 
Thailand

 

ที่อยู่

บริษัท ไบโอแอคทีฟ จำกัด
188/1 อาคารไบโอแอคทีฟ ซอยศรีรุ้ง
ถนนเชื้อเพลิง แขวงช่องนนทรี
เขตยานนาวา กรุงเทพฯ 10120

Phone

  • Hot line: 66-2350-3090
    FAX : 66-2350-3080

 

You are here: Home Products TOMY Uncategorised Autoclaves FLS-1000